| 1/8 GP OFFROAD BUGGY INFERNO MP9 Series Spec Chart | ||||
| INFERNO MP9 TEAM KYOSHO INTERNATIONAL |
INFERNO MP9 Standard Grade |
INFERNO MP9 TKI 2 / TKI 2 SPEC A※ |
INFERNO MP9 TKI 2 / TKI 2 SPEC A※ |
|
| Item No. | 31782 | 31783 | 31785 (Kit) / 31784 (SpecA) | 31786 (Kit) / 31787 (SpecA) |
| Price (w tax) | \ 123,900 | \ 84,000 | \92,400 / \96,600 | \92,400 / \96,600 |
| Drive Train | Shaft Driven Full Time 4WD (3 Diff.) | |||
| Chassis | A7075 3.0t Hard Anodized Light Weight |
A7075 3.0t Light Weight |
||
| Upper Deck | A2017 2.5t Press | |||
| Suspension | Double Wishbone | |||
| Diff. Gear (front / center / rear) |
4-Bevel Type | |||
| Ring Gear | Milled / Straight Cut | |||
| Bevel Gear | Die Cast (thin type) | |||
| Front Shock | C-Clip Type / S-size / Velvet Coating | C-Clip Type / S-size / Normal Coating | Threaded Type / S-size / Normal Coating | |
| Front Shock Spring | IF350-916 | IF350-816 | IF350-714 | |
| Front Shock Piston | IF347-128 | SP Type / IFW405-1.3 | ||
| Front Shock Oil | Not Included | Kit：Not Included / SpecA：♯400 (Assembled) |
||
| Front Shock Stay | 7075Milled / S-size / Hard Anodized | 7075Milled / S-size | 新規強化タイプ 7075Milled / S-size | |
| Rear Shock | C-Clip Type / L-size / Velvet Coating | C-Clip Type / M-size / Normal Coating | Threaded Type / M-size / Normal Coating | |
| Rear Shock Spring | IF348-1216 | IS106-1016 | IF348-1014 | |
| Rear Shock Piston | IF347-138 | SP Type / IFW405-1.4 | ||
| Rear Shock Oil | Not Included | Kit：Not Included / SpecA：♯400 (Assembled) |
||
| Rear Shock Stay | 7075Milled / L-size / Hard Anodized | 7075Milled / M-size | 新規強化タイプ 7075Milled / M-size | |
| Ball Bearing | 18pcs | |||
| Camber Angle (front / rear) | Adjustable / Adjustable | |||
| Spur Gear / Clutch Bell | 1Mod. 46T / 13T | |||
| Length | 490mm | |||
| Width | 307mm | |||
| Height | 180mm | |||
| Grand Clearance | 28mm | |||
| Wheel Base | 325mm(Adjustable by rear hub collar position) | |||
| Tread (front / rear) | 2 Type / 3 Type(Adjustable by Sus Bush) | |||
| Tire (front / rear) | AKA I Beam(Medium) | Not Included | ||
| Insert (front / rear) | AKA Medium | Not Included | ||
| Gear Ratio | 11.7：1 | |||
| Weight | Approx. 3,300g | |||
| Engine | 21.Class (Not Included) | |||
| Engine Mount | Aluminum with Slit | |||
| Deff. Cup Joint | Light Weight Type | Normal Type | Light Weight Type | |
| Body | MP9 IFB002 | New Low Height and High Down Force | ||
| Sus Holder (front-front side) |
7075Milled | 新規強化タイプ 7075Milled | ||
| Sus Holder (front-rear side) |
Aluminum Milled | |||
| Sus Holder (rear-front side) |
Aluminum Milled | |||
| Sus Holder (rear-rear side) |
Plastic | 7075Milled / IFW407 | ||
| Trun Buckles | Gold | Black | ||
| Balls (pibot) | 7075 | Steel / Black | ||
| Sus Bush | Gray | Yellow | White | |
| Wheel | 0-Hole Type / IFH003BK | Not Included | New Light Weight / Dish Type | |
| Wheel Nut | Nylon Type | Normal Type | ||
| Wheel Hub (front / rear) | F：Normal / R：Normal | F：Normal / R：Narrow | ||
| Universals | Front / Rear / Center | |||
| Torque Rod | Plastic | |||
| Diff. Oil (front / rear / center) |
♯4000 / ♯2000 / ♯4000 | ♯5000 / ♯3000 / ♯5000 (SpecA: Assembled) | ||
| Brake Disc | Milled with Slit | Milled | ||
| Knuckle Arm | 7075Milled | |||
| Rear Hubs | Plastic | Aluminum：IFW414 | ||
| Fly Wheel | 7075 + Hard Anodized | 7075 | ||
| Radio Post | Plastic | Aluminum | ||
| Wing Stay Post | Plastic | Aluminum | ||
| Steering King Pin | Normal | Long Type / IF467 | ||
| Air Cleaner | IF345 (HG Air Cleaner) | New Low Height Oval Type | ||
| Fuel Tank | 125cc | |||
| Clutch | Aluminum / 3pc HD-Type7075 | |||
| Sway Bars | front：2.5 / rear：2.8 | front：2.3 / rear：2.5 | ||
| Fuel Filter | No.1876 | |||
| Screws | Hex Type | |||
| カーボンバッテリープレート | × | × | × | ○ |
※as at Dec 2010
