＜＜BACK

1/27 R/C EP TOURING CAR MINI-Z Racer MR-02

MINI-Z MR-02 CHASSIS SET (transmitter not included)

Fitted with RA-4B FET

No.30450F　　 Chassis Set

 □Available : 25 May 2006

A new generation Mini-Z chassis shows new running style and scale form.

As the world of micro racing has spread around the globe, the MR-02 chassis promises even more scale variety. With its concentrated mass and ultralow chassis height, the low center of gravity and intense compact nature of the MR-02 give it the Mini-Z´s highest performance specifications. Even more running performance potential has been added, and the components combine easily to produce an even higher-level result. Add the MM-type mid-ship motor mount to the RM-type rear motor mount for a two-version line-up. In response to various wheelbase and overhang differences, a wide range of body styles can be developed to accelerate the level of fun and appreciation in building your own collection. With even more Mini-Z sophistication than the original Mini-Z, the MR-02 chassis can show the real enjoyment of micro motor sports like no other.

Simplicity makes maintenance easy. Uses kingpin coil-type front suspension. Optimum structural geometry realizes mild control characteristics.

  

High frequency FET speed control amp with reverse and brake function, rear damper, servo saver, and gear guard are all included as standard features. Compact chassis is packed full of sophisticated components.

  

Lower C of G and lower chassis height with concentrated mass in the center all result from the parallel layout of the battery mounts. The chassis bottom layout produces greatly improved racing performance.

Due to the snap-lock system, the kingpin, coil spring and tie-rod can be installed or taken out by simply removing a C-ring. This makes maintenance and tuning easy.

  

The swing-type T-bar rear suspension produces excellent road holding. On various indoor surfaces, free traction control and tail control are possible.

  

Equipped with gear guard to protect gears from shocks from the surface. Allows free setting of the gear ratio for high acceleration or high speed courses.

MM chassis/ Mid-ship Motor Mount On the MM chassis, the motor is mounted mid-ships directly in front of the rear axle. Mass is concentrated in the center and produces good agility and a shorter rear overhang.

  

RM chassis/ Rear Motor Mount On the RM chassis, the motor is mounted behind the rear axle. Positioning the C of G at the rear produces high levels of traction. This makes tail control all the more interesting. RML chassis/ Special specifications generate lower chassis height for the RM chassis.

  

  • ReadySet includes everything needed except batteries. Fully assembled chassis even has R/C components installed.
  • Fully completed body is painted with decals already applied, including detailed graphics.
  • Ideal position of kingpin realizes reduced scrub. Agile steering performance combines with highly detailed scale bodies to produce authentic racing experience.
  • Wide scope for setting adjustment to suit race conditions, such as toe-in etc.
  • Chassis design is ideally suited to low, wide body styles with short overhangs.
  • Realizes long run times of about 1 hour with four AAA alkaline batteries.
  • Equipped with high resolution digital steering servo.
  • Standard specifications enable 6 cars to race at the same time.
  • Huge variety of option parts so you can upgrade the level of performance as high as you like.
Even more power for more speed and performance!

The low center of gravity of the MR-02 chassis is enhanced with the RA-4B FET motor control amp.
One-piece unit combines receiver with a high-power amp to deliver sharp pick up and higher maximum speed.
Chassis Technical Data
Length
 125〜133mm
Width
 68〜76mm
Ground Clearance
 4mm
Wheelbase
 86〜98mm
Tread (F/R)
 59〜65mm
Tire(F/R)
 φ 25×8.5〜11mm
Gear Ratio
 7.3, 6.3, 5.5, 4.9 : 1
Weight
 130g (approx.)
Motor
 130-class

*Technical data values with (variable) indicated can be changed according to the type of chassis.

Body Compatibility Table for Mini-Z Racer Chassis & Wheelbases
Chassis Type WheelbasesBodys Type
S M L LL 3L 4L Narrow MR01Wide MR02 Conpact
　MR-01 ○ ○ ○ × × × ○ ○ × ×
　MR-01 HighMount　 ○ ○ ○ × × × × × × ○
　MR-01F ○ ○ ○ × × × ○ ○ × ×
　MR-02MM × × × ○ ○ ○ × × ○ ×
　MR-02RM ○ ○ ○ × × × × × ○ ×
　MR-02RML ○ ○ ○ × × × × × ○ ×
　MR-015MM × × × ○ ○ ○ ○ ○ × ×
　MR-015RM ○ ○ ○ × × × ○ ○ × ×
　MR-015RML 　 　 　 　 　 　 　 　 　 　
　MR-015HM 　 　 　 　 　 　 　 　 　 　
　

*○Match ×Doesn’t Match

□Last updated:30 Jul 2006

PAGE TOP