＜＜BACK

1/27 R/C EP TOURING CAR MINI-Z Racer MR-02 MM (Loaded with RA-4B FET)

ENZO FERRARI

WHITE

No.30451FW　　 Readyset

 □Available : 31 May 2006

Mid-ship version of the 2nd generation MINI-Z chassis. Combines detailed scale form with racing performance!

Mid-ship layout features motor mounted in front of the rear axle. Minimal overhang with a low, wide form enables the special characteristics of certain car styles to be recreated with amazing accuracy. With the weight of the motor positioned close to the center of the chassis, the concentration of mass realizes even lighter control characteristics. Superior agility and handling produce excellent drivability for the best micro-racing experience around.

98mm LL-size long wheelbase chassis with mid-ship motor mount.

  

Swing axle on the rear suspension delivers excellent control and agility.

  

Advanced design achieves minimal overhang and combines with high degree of mass concentration.
Even more power for more speed and performance!

The low center of gravity of the MR-02 chassis is enhanced with the RA-4B FET motor control amp.
One-piece unit combines receiver with a high-power amp to deliver sharp pick up and higher maximum speed.

＜ ReadySet Contents ＞

  • Factory assembled chassis with installed R/C Unit（Loaded with new FET）
  • Plastic body complete with colorings and markings.
  • Wheel-type Transmitter
  • Pinion Gears (6T, 7T, 8T, 9T)
  • Wheel Wrench
  • * AA-sized batteries X 8 and AAA-sized batteries (alkaline or Ni-MH) X 4 are sold separately.
Chassis Technical Data
Length
 126mm
Width
 70〜76mm
Ground Clearance
 4mm
Wheelbase
 98mm（LL）
Tread (F/R)
 61.5〜66.5mm／59〜65mm
Tire(F/R)
 Φ 25×8.5mm／ Φ 25×11mm
Gear Ratio
 7.3、6.3、5.5、4.9：1
Weight
 130g (approx.)
Motor
 130-Class

*Length, wheelbase value shown in ( ) indicates chassis size.

□Last updated:27 Jul 2005

PAGE TOP