＜＜BACK

1/27 R/C EP TOURING CAR MINI-Z AWD MA-010

MA-010 Chassis Set Full Ball Bearing Specifications

No.30560V2　　 Chassis Set

 □Available : 27 Jul 2007

Palm-top size shaft-driven AWD chassis hits even higher levels of efficiency with full ball bearing specifications!

Precision differential gears on front and rear in the shaft driven AWD power train combine with 4-wheel independent suspension to produce performance way beyond its size. The benefits of all wheel drive (=4WD) are realized by on-road and off-road racing machines, and have been condensed into the dynamic MA-010 chassis. The factory-assembled chassis is loaded with a high performance receiver and digital servos, so just add you favorite body style to complete the machine. As this set comes without transmitter, you can also use your transmitter from any other Mini-Z Racer that you might own. The ball bearing set that was previously a highly sort after option, is now standard. The effect of reduced resistance and increased drive efficiency can be felt immediately. And it’s pre-assembled so only a short time is needed for completion.

Packed with precision high-performance features such as mid-ship motor mount, shaft-driven AWD and 4-wheel independent suspension.

  

All wheels equipped with metal shaft resin molded universal swing shafts. Reliably transfers drive power and realizes smooth suspension movement.

  

Specially shaped teeth on crown and pinion drives the propeller shaft in the 3 bevel gear diff gears.

Optional parts allow setting of toe-in angle on front and rear. Tie-rods can be attached / removed easily for excellent maintenance characteristics.

  

Drive a dropped-chassis by adjusting with the chassis height adjustment collars. The 4 different pinion gears produce a wide range of gear ratio settings with the 3 different spur gears.

  

Front features bump stop to avoid body contact with chassis and regulate suspension stroke.

◎Includes two sets of wheels with different width and offset.

  

 

  • Ultra-fine 1/100mm finish.
  • Attach / install the front diff unit with just 4 screws, or the rear diff unit with 6 screws.
  • 4-wheel independent suspension features coil spring king pin strut system.
  • Produces the controlled drift of high-performance AWD racing machines.
  • Only 5g heavier than the MR-02 chassis but with AWD and 4-wheel independent suspension.
  • Chassis design realizes a minimum width of 65mm, ideal for bodies suited to the 01 / 015 chassis.
  • Compatible with most bodies that fit the MINI-Z Racer M and L size wheelbases. (Some bodies may not be compatible).
  • Full ball bearing specifications include optional ball bearing set.
＜MINI-Z AWD and MINI-Z Racer Interchangeability＞
Regarding Body Fitting
・The MINI-Z AWD chassis width is the same as the MINI-Z Racer MR-015.
　Most bodies for the M and L-size wheelbases of the MR-01 and MR-015 chassis are compatible with the AWD.
Regarding Wheels
・MINI-Z AWD features specially designed wheels. These wheels are not compatible with previous versions of the MINI-Z.
　Please select and use the wheels included in the chassis set.
Regarding the Auto Scale Collection
・Wheels included in the Auto Scale Collection are not compatible with the AWD.
　Use together with the wheels included in the AWD chassis set.
Regarding the Motor
・The wiring on the motor included on the MINI-Z AWD is different to other motors in the MINI-Z Racer Series.
　Please use the motor set specifically for the AWD.

＜ Chassis Set Contents ＞

  • Factory assembled chassis with pre-installed R/C unit
  • 4 pinion gears and 3 spur gears (3 combinations to suit wheelbases)
  • Wheels with various off-sets and 2 different widths for a total of 6 combinations (14 wheels), plus 8.5mm wide tires X 4, and 11mm wide tires X 2.
  • Chassis height adjustment collars
  • Wheel wrench
  • Note) Body set, transmitter, AAA-size batteries X 4 for chassis (alkaline or Ni-MH) are sold separately
Chassis Technical data
Length
 127.5mm（M）、131.5mm（L）
Width
 65〜72mm （67mm）
Height
 43mm
Ground Clearance
 4mm
Wheelbase
 90mm（M）、94mm（L）
Tread (F/R)
 56.5〜63.5mm／56.5〜61mm （F／R 58.5mm）
Tire(F/R)
 Φ 25×8.5mm 2pcs／Φ 25×11mm 2pcs （Φ 25×8.5mm 4pcs）
Gear Ratio
 7,2／6.4／6.0／5.7／5.3／5.0／4.5：1
Weight
 135g (approx.)
Motor
 130-Class

□Last updated:21 Apr 2007

PAGE TOP