＜＜BACK

EP 400 Class HELICOPTER

EP CALIBER 450V Ver.M II

(with Ver.M II type metal rotor head)

No.20450M2　　 Kit

 □Available : 30 Aug 2009

*CAD picture

Appreciate the control and agility of a full metal head!
Fly large loops with high-efficiency control.

With its all-metal head the Ver.M specifications were designed to take the CALIBER 450's advanced 3D acrobatics to competition-level. The Ver.M II takes the stability and maneuverability to an even higher standard with the stabilizer positioned above the rotor plane. Initial response to control inputs are mild and overall flight efficiency is improved. The smooth, precise movement of the metal rotor head unit and push-pull linkages on all control inputs delivers linear control and makes the helicopter respond on command to the will of the flier. The swash plate features 120° swash mode EMS. With mid to high level R/C transmitters, the maneuverability and precision flight control needed for 3D flying performance will exceed the demands of intermediate and expert-level fliers.

Anodized metal head unit positions the stabilizer on top for a negative delta-3 design. This realizes mild response to initial control inputs as well as effective movement.

  

1mm thick carbon realizes the strong, high rigidity box-structured mainframe. Gear axis are contained within the frame to reduce drive loss and allow easy adjustment.

  

Three control levers for aileron, elevator and pitch are positioned on the same axis delivering balanced stroke and easy setting adjustments.

The first helicopter in the EP400 class with full push-pull linkages reduces play and realizes linear control response.

  

Main rotor using long 325mm tail belt can be installed to deliver a wider range or flight characteristics. (*Main rotors are sold separately.)

  

  • Upper position of the negative delta-3 stabilizer results in minimal tracking slippage and efficient control.
  • Advanced design and specifications take electric helicopter maneuverability to a new level.
  • Features newly developed tail unit structure from the CALIBER 90.
  • Push-pull linkages on all control inputs realize sharp control response above its class.
  • Lower bell-hiller ratio results in more precise control.

＜ Required for operation ＞

  • 6-channel,4-micro servo R/C System for helicopter
  • Gyro
  • 200 - 300W Class brushless motor (No.70277 Kyosho AF400BLS motor F/12/31)
  • Amp compatible with brushless motor (Kyosho Sky Victory BLS35 amp etc.)
  • Pinion gear (0.4 module / No.W6035)
  • Length 280mm-315mm, thickness of installing part 5mm drag holes, 3mm main rotor (No.CA2502 carbon main rotor [L=325] etc)
  • 11.1V-1,800 - 2,200mAh lithium polymer battery (No.ORI60034 2,100mAh Li-Po recommended)
  • Battery charger (No.ORI62200 Advantage Advanced Flight Charger / No. ORI62204 Stability Balancing System recommended)
Technical Data
Length
 660mm
Width
 110mm
Height
 228mm
Gear Ratio
 10 : 1 : 4.8 (with 35T pinion)
Weight
 780g (approx.)
Motor
 200-300W Class Brushless Motor ＜Kyosho / F/12/ 31＞ (sold separately)
Battery
 11.1V-1,800 - 2,200mAh Li-Po (sold separately)
Main Rotor Diameter
 From drag bolt to blade tip 280mm-325mm (sold separately)
Tail Rotor Diameter
 155mm

This R/C model is not a toy!
Correct assembly and maintenance and choice of appropriate flight location is required for the safe operation of this model. Failure to use responsibly and perform required safety checks can cause fatal accidents. Beginner flyers should never fly solo.

□Last updated:13 Apr 2009

PAGE TOP