No.32815ADL
Kit |
□Available : 23 Jul 2010 |
Set comes with the body and chassis fully loaded with optional parts to battle for the SUPER GT Challenge!
Gloss coat finish and 2.4GHz unit complete the feature-packed kit!
Equipped with a range of high performance optional parts as standard for a race-winning edge. These represent huge savings than if parts are purchased individually! |
|
Gloss coat added in response to user feedback on our internet survey. Realizes a hardened surface with a vivid finish. |
|
Same battery layout as the MR-02 chassis achieves a low center of gravity with a main chassis width equal to the narrow MR-015. The main chassis is compatible with all MINI-Z Racer body styles. |
Equipped with 2.4GHz R/C unit specially designed for the MR-03. Requires no frequency bands. Simply switch power ON and enjoy safe and stable control. |
|
Digital steering servo features a coreless motor and a gear unit that has 3 times the gear reduction ratio of previous units for powerful movement and position retention. |
|
Can be set to either narrow or wide tread by replacing the front lower and upper plates and steering tie rod. Of course the wheelbase can still be adjusted to suit certain car types. |
Optional gyro unit can be fitted for automatic correction of steering and throttle for even easier control. Layout design has space allocated so the gyro unit can be easily installed. |
|
|
|
|
- Specially selected range of optional parts compliment the semi-assembled chassis with wide tread and RM mount.
- Features newly developed innovative ‘VCS’ front suspension that changes camber angle in concert with suspension stroke.
- Equipped with the new digital servo with integrated coreless motor.
- Features ASF 2.4GHz R/C system that requires no frequency bands. A single transmitter can be used with 2 or even 3 different models. Transmitter is sold separately.
- Coil springs on front suspension can be easily replaced by removing the spring stopper with just two screws.
- Features high efficiency gold plated battery terminals.
Chassis type for each MR-03 set is displayed below.
Refer to this table when fitting a MINI-Z Racer body.
|
＜Note: When Converting＞
| ●Front tread | ： | When converting to narrow or wide tread, the appropriate type of front lower and upper plates as well as the steering tie rod are required. |
| ●Rear tread | ： | Install the special wheels included on the each body. |
| ●Wheelbase | ： | Adjust with the parts included on the body.
|
|
VCS (Variable Camber Suspension) takes performance to a new dimension! |
Upper arms connected to king pins and knuckles with ball links allow the camber angle to change with suspension stroke, just like on a real car. Tire contact with the surface remains constant, even during chassis roll and suspension stroke from surface tracing. The newly developed digital steering servo uses a coreless motor that delivers quick steering response and sharp maneuverability that feels like its riding on rails. Also, the upper arm and one-piece cantilever provide ideal cushioned movement for the coil spring. In addition, the stainless steel king pin and wheel shaft delivers smooth movement for excellent running stability. Precision geometry settings eliminate toe in and toe out change during suspension stroke and produce a neutral steering feel. The innovative VCS (Variable Camber Suspension) represents a significant evolutionary step in the history of the MINI-Z.
|
Newly developed digital steering servo features coreless motor and new gear reduction ratio |
The powerful position retention and movement of the digital servo is enhanced with the adoption of a coreless motor that provides instantaneous pick up and stopping. In addition, the newly developed steering gear unit has 3 times the gear ratio of previous versions for greater power in holding its position so it holds its line firmly in the face of kickbacks from the road surface and also delivers even more precise movement and response.
|
< Gloss Coated Finished Body > |
 |
●Satisfaction of deep shine and beautiful gloss
●Protected the body paint and decal
●Less likely to scratch the other cars in the event of a collision
●Increasing stiffness of body by hard gloss coated layers
●No joint lines of decal makes high quality scale
●Easy maintenance and long-lasting beautifulness
●No worry for coming off the paint, which keeps a body lasting long
●Keep the good body condition from any scratches
|
|
|
|
What is ADVAN SUPRA JGTC2003? |
The best Japan domestic race called, "Box Race" which was always the most popular category of Japan GT Championship previous incarnation of Super GT. In 2003, the top three, SUPRA, GT-R & NSX brought so much high tension. It caught everyone's eye on the championship until the end of season. The most dramatic race for all SUPRA was a battle of ADVAN SUPRA, that it won a pole position in Suzuka final race. The machine made a big storm in a final championship race by its aggressive driving actions, which excitement is still lasted in all fans' hearts with the spectacular red & black color.
|
＜Option Parts Included as Standard＞ |
●Ball Bearing Set No.MZW1
●Color Nylon Nuts (blue) No.MZW13BL
●Ball Differential Set No.MZW206
●Rear Oil Shock Set No.MZW207
●Friction Shock Set (RM) No.MZW216
●Front Spring Set (orange installed, 4 types included) No.MZW401
●Carbon Rear Suspension Plate Set (soft installed, medium & hard included) (for RM/HM) No.MZW404
●SP Long King Pin Ball Set No.MZW412
●Setting Tie Rod Set No.MZW402
|
 |
|
|
＜ Kit Contents ＞
- MR-03W RM semi-assembled chassis
- Pre-painted plastic body finished with markings
- Wheels and tires (racing radial front 30-degree, rear 20-degree)
- Upper and lower plate for wide tread (front), steering tie-rod (installed)
- Front suspension spacer for adjustment
- Parts for changing front car width
- 6T, 7T, 8T, 9T pinion gears
- Wheel wrench
- Pinion removal tool
- Spare nuts
- Wheel wrench
- Pairing stick
|
*PERFEX KT-18 Transmitter
|
＜ ReadySet Contents ＞
- ASF2.4GHz PERFEX KT-18 transmitter for MINI-Z or Kyosho EX-5UR ASF transmitter (No.82011)
- Auto Scale Collection (body set, wheels)
- 4 x AAA-size alkaline or NiMH batteries
- 4 x AAA-size alkaline batteries for transmitter (KT-18), 8 x AA-size alkaline batteries (EX-5UR)
|
Length
|
124〜133mm（MM Chassis:125〜133mm、RM Chassis:124〜132mm） |
Width
|
65〜76mm |
Height
|
34〜35mm |
Wheelbase
|
86〜106mm（86、90、94、98、102、106） |
Tread (F/R)
|
(Wide)61.5mm / 59mm (Narrow)56.5mm / 56.5mm [when wheel offset is 0] |
Tire(F/R)
|
23.5〜25×8.5mm / 25〜27×8.5〜11mm |
Gear Ratio
|
7.3、6.3、5.5、4.9：1 |
Weight
|
135g approx. |
Motor
|
130-Class |
ADVAN SUPRA JGTC 2003 GT Limited Technical data |
Length
|
171.0mm |
Width
|
72.0mm |
Height
|
46.0mm |
Chassis Type
|
MR-03W-RM |
Wheelbase
|
94.0mm (L) |
Tread (F/R)
|
61.5mm／59.0mm |
Tire(F/R)
|
Φ25.0mm×8.5mm／Φ25.0mm×11.0mm |
Weight
|
135g |
No crystals needed! 2.4GHz system blocks interference. |
Using 2.4GHz frequency, the transmitter and chassis automatically lock on to open bands with the 2.4GHz ASF system. Realizes a stable environment without interference so you can have confidence in your radio system's response. Allows up to 40 cars to be raced at the same time. Simple pairing process (registering transmitter with the chassis) also enables a single transmitter to be used with multiple chassis. The next generation of proportional radio control systems starts here.
*Set does not include R/C System. |
|
|
|
□Last updated:25 May 2010
PAGE TOP
|
|
