No.10051R-AP
ARF Kit |
□Available : 16 Dec 2010 |

Flight stability that lets you fly like an expert! Hands-off and the airplane returns to level flight!
Optimal beginner electric flight performance with autopilot back up!
Autopilot unit uses infrared sensor to track the horizon and send signals to the servos for automatic correction of nose and wing angle.
*NOTE) Requires calibration on the ground. Also, dramatic changes in shadows etc. can affect control. |
|
Semi-symmetrical rectangular wings produce the optimal balance between stability and forward penetration as well as calm control response for beginner fliers. |
|
Semi-symmetrical rectangular wings produce the optimal balance between stability and forward penetration as well as calm control response for beginner fliers. |
KV 1,100, 400W output brushless motor included. Generates stable thrust from the included D11 x P7 propeller for electric motors. |
|
Tricycle landing gear allows stable landings and takeoffs. Features rudder connected nose gear for steering control on the ground. |
|
Beginner-friendly fuselage structure uses wing bolts that can be tightened by hand, a fixed tail fin, and requires no gluing to complete. |
Radio compartment features plenty of space for easy linkage adjustment. Vertical fin and servo bed are also pre-fixed so no difficult work is left to complete. |
|
Expertly pre-covered in layered monochrome film for a pre-finished color scheme. Vertical fin is pre-fixed and no gluing is required for completion. |
|
|
- Combines high stability with calm control for ideal beginner airplane characteristics.
- Includes autopilot system.
- Equipped with KV 1,100 and 400W output brushless motor.
- No gluing required for completion. Film covering completes color scheme.
- Insert pins to connect wing halves and secure with tape to complete main wing assembly.
- Vertical fin, servo bed, ailerons, rudder and horns are all pre-installed.
- Lightweight balsa fuselage structure provides energetic flight performance.
- Features rudder connected steering nose wheel.
- Equipped with pre-installed flexible pipe for rudder and elevator linkage rods.
- Includes propeller, spinner, linkage parts assembly and lightweight foam tires.
|
< Required for operation >
- 4-channel R/C system for airplanes
- ‘Y’ cord (lead), extension cord for aileron
- ESC for 50A+ brushless motor (No.ORI62054 Avionics - Captain 45Amp brushless ESC cannot be used)
- 11.1V - 3,200-3,700mAh Li-Po battery (recommended: No.ORI600063 Avionics Li-Po 3200mAh 11.1V)
- Battery charger
- Batteries for transmitter
|
Length |
1,173mm |
Width |
1,400mm |
Weight |
1,900g approx. |
Wing Area |
36.4dm2 |
Wing Load |
52.1g/dm2 (approx.) |
Wing Type |
Original semi-symmetrical |
Propeller |
D11×P7 |
This R/C model is not a toy!
Correct assembly and maintenance and choice of appropriate flight location is required for the safe operation of this model. Failure to use responsibly and perform required safety checks can cause fatal accidents. Beginner flyers should never fly solo.
|
|
|
□Last updated:08 Nov 2010
PAGE TOP
|
|