＜＜BACK

1/8 GP 4WD RACING BUGGY

INFERNO MP9 TKI2 SPEC A WC limited edition

No.31787　　 Kit

 □Available : 16 Feb 2011

Semi-assembled version of the machine that prevailed at the toughest World Championships ever!　The fastest off-road machine in the world, now for everyone to drive!

With a total of 8 victories at the bi-annual Off-Road World Championships, the Kyosho Inferno series has established an unrivalled record of success. In perhaps its hardest victory ever, the Inferno MP9 TKI 2 commanded the field at Thailand’s Pattaya course to claim the 2010 championship. The machine that was driven to victory by Team Kyosho International is now ready for other 1/8 buggy fans to own. The superior traction of the TKI 2 realizes high efficiency handling for dominant speed as well as race-winning strength and durability. The revised design of the front and rear suspension holders provides additional strength so the TKI 2 can take on the hardest courses with standard parts. Also, the battery position has been located in front of the C of G for improved balance and control under many different conditions. Also, the difficult assembly steps have already been completed by expert staff to provide the MP9 TKI 2 in this reliable semi-assembled condition. As the name indicates, you can discover what its like to drive the fastest off-road machine in the world with the Inferno MP9 TKI 2 WC (World Champion) Limited Edition SPEC A.

Strengthened front shock stay features less thinning. Able to handle hard landings, even on concrete. (Anodized in gun metallic)

  

Rear shock stay is reinforced in the same way as the front. Features 10 upper arm mounting holes for precise positioning. (Anodized in gun metallic)

  

Strengthened front lower suspension holder is wider and able to handle big jumps and hard contact.

Redesigned and reinforced for extra strength around the stabilizer mounting holes on the front lower suspension arms. (Lower is reinforced)

  

Reinforcing ribs on the ball end section of the rear upper suspension arms dramatically increase strength and rigidity to handle hard crash contact.

  

Receiver battery is positioned further forward. Improves jump control and cornering stability.

After partial assembly by skilled staff, the Inferno’s designer Yuichi Kanai checks the assembly of the engine and servo etc. of each chassis. Workmanship and reliability is guaranteed.

  

 

  • TKI2 chassis is equipped with special parts used by Team Kyosho International at the 2010 World Championships. (Refer to picture for details)
  • Chassis partially assembled by expert staff and checked individually by Yuichi Kanai.
  • Machined aluminum rear hubs and shorter suspension arms realize increased traction.
  • Dial adjustable Big Bore Shocks are equipped on front (small) and rear (medium).
  • Lightweight dish wheels support sure-footed traction.
  • Shock pistons with tapered holes dissipate pressure more effectively.
  • Longer king pins and flanged collars prevent knuckles from coming loose.
  • Features machined aluminum wing stay posts, radio posts and rear suspension holders.
  • Rounded shape of the low profile large capacity air cleaner matches the shape of the body.
  • Race settings can be fine tuned with adjustments to wheelbase, tread, roll center, caster angle, toe angle and camber.
  • Retains the competitive features of the Inferno MP9 TKI2 SPEC A.
< Special features included in the INFERNO MP9 TKI2 SPEC A WC limited edition >
● Reinforced Front Shock Stay ● Reinforced Rear Shock Stay
● Reinforced Front Lower Suspension Holder (front side) ● Reinforced Front Suspension Arm
● Reinforced Rear Upper Suspension Arm ● Front Carbon Battery Plate
Checked individually by Yuichi Kanai!

Everything from ground up is made in JAPAN.
The only 1/8 buggy in the market made in the country with extreme quality inspection.

"SPEC A(ARR)" is a semi assembled kit. SPEC A has been factory assembled by RC dedicated experienced staffs and thoroughly checked by the designer Yuuichi Kanai himself to deliver the best buggy quality known to man.
Even small details such as ride height and alignment are strictly measured and set 1 by 1.

Oil shocks and differential gears assembly are critical areas. Each kit is assembled by highly experienced staffs knowing how each part must come together.
All of this will allow the chassis to be raced instantly.
< 2010 IFMAR 1/8 GP Off Road World Championships >
TEAM KYOSHO INTERNATIONAL's Cody King (USA) is crowned 2010 IFMAR 1/8 GP Off Road World Champion with the INFERNO MP9 TKI2! 〔Click here for details on the World Championship!〕

＜ Set Contents ＞

  • Semi-assembled chassis set
  • Special clear body
  • Special wheels
  • Logo Decals

＜ Required for operation ＞

  • 2-channel, 2-servo R/C System for cars
  • 21-class engine
  • Muffler and manifold
  • Tires & inner foam supports
  • Fuel
  • Engine starting tools
  • Starter box
  • Batteries for R/C system
Chassis Technical Data
Length
 490mm
Width
 307mm
Height
 180mm
Ground Clearance
 28mm
Wheelbase
 325mm (4 settings with various rear hub collar positions)
Tread (F/R)
 254mm (2 front settings, 3 rear settings with bush changes)
Tire(F/R)
 sold separately
Gear Ratio
 11.7：1
Weight
 3,300g (approx.)
Engine
 21-class engine (sold separately)

□Last updated:14 Jan 2011

PAGE TOP